| DJACK | -- 11-24-2010 @ 8:17 PM |
|
WHAT IS THE TORQUE OF THE 1939 FLATHEAT HEAD BOLTS? THANKS DENNIS
|
|
| Bill4d1merc | -- 11-24-2010 @ 10:10 PM |
|
DJACK Run all nuts down in proper sequence to 48 foot pounds with engine cold. When engine is warmed up torque the nuts to 55 foot pounds using the same sequence. Aluminum heads are 35 to 40 foot pounds. Bill
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=2231 |