| unclemark | -- 08-22-2010 @ 8:50 AM |
|
I have a stock working wiper on my 41 panel, the arm is stock but the original blade was missing. I ordered and tried to install a re-pop but it does not have the same configuration. Anyone know where to get a correct original one or some photos of how to install the after market blade on the original arm. thank you in advance guys. Mark
|
|
| TomO | -- 08-22-2010 @ 9:36 AM |
|
C&G and other vendors sell the blade that works with your original arm. Bob Drake makes reproduction arms that will work with the modern type blade. Tom
|
|
| supereal | -- 08-22-2010 @ 9:38 AM |
|
Mark: Usually the original "hook" style blades won't fit the later type arms. That isn't all bad, as the original hooks were lame, anyway. I prefer the "hot rod" arms and blades, such as those at C&G (pg 217 in the catalog). They also have the original style blades, the 8.25" size, 78-17528-B, $6. 800/266-0470
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=1745 |