| budatlitho | -- 07-06-2024 @ 4:32 PM |
|
Hello: I need to know what the amperage draw is for this heater. In process of rewiring, and original wiring was lost. I want to put an in-line fuse in the circuit. Thanks in advance! Bud
|
|
| JayChicago | -- 07-07-2024 @ 6:06 PM |
|
What I would do: Start with a ten amp fuse. If that blows, go to a 15 amp. If that blows go to a 20 amp. If that blows, stop, not safe to go higher, must be some fault causing over-current.
|
|
| alanwoodieman | -- 07-09-2024 @ 12:36 PM |
|
6 amp
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=17123 |