| flathead48 | -- 01-26-2024 @ 2:24 PM |
|
Has anyone ever replaced on a a 46-48 ford car, if so how is it done. Thanks, Rick
|
|
| kubes40 | -- 01-27-2024 @ 8:26 AM |
|
I have done this. I cut the protruding part off flush with the housing. Then drilled out as much of the core as necessary. I then placed the new stud in the hole I'd made and welded around the housing / stud. Oh, I did bevel the stud a bit for a better weld penetration. Working well to this day after many miles and many years. Mike "Kube" Kubarth
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=16889 |