JohnA | -- 09-15-2022 @ 11:44 AM |
Hello- I have rebuilt my Holly 94/59 that goes on my 1948 Ford 2dr. I can not figure out where the felt washer and little copper washer go that lube the throttle plunger as it goes up and down. Tks Johna
|
|
40 Coupe | -- 09-16-2022 @ 5:36 AM |
Where the throttle plunger passes through the Carb body. The felt is in the body and held in place by the washer which is crimped in place. It will not effect operation if you do not replace them.
|
|
JohnA | -- 09-16-2022 @ 11:09 AM |
Thats near bottom of carb, there is a little indent because my washer fits in there. Tks Johna
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=15944 |