| thirtysixford | -- 08-22-2022 @ 11:56 AM |
|
I'm sure this has been gone over but what is the correct plug reach for a 59 AB stock heads? I have been using NGK B-6L I noticed the first couple of threads going into the head are discolored like they were into the chamber too far. NGK numbering system says L is for long reach.......
|
|
| ford38v8 | -- 08-22-2022 @ 3:42 PM |
|
Dunno, but why not just use the plug it's supposed to have? Champion H10, or H10C as available today. Alan
|
|
| alanwoodieman | -- 08-22-2022 @ 7:57 PM |
|
use autolite 216 and leave the H10 and H10C for the lawnmowers
|
|
| 51504bat | -- 08-22-2022 @ 8:35 PM |
|
Ford called for H-10 Champions back in the day. And yes today they are packaged and sold as lawn mower plugs. I've run H-10's and Autolite 216's in my 8ba. Didn't really notice any differences. I'm currently using 216's but I'd go back to H-10's without any hesitation. ______________ No signature
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=15890 |