| Bobbys36 | -- 07-30-2022 @ 12:59 PM |
|
I am currently finishing up the restoration of a 1936 Tudor sedan that my Dad and I started restoring years ago. Unfortunately my Dad passed away several years ago and is no longer around to help me finish. He did not keep the original door panels so I do not have any patterns to go by for the upholstery. I am using the "May 1936" pattern as shown on the bottom of page 144 of "The Early Ford V8 as Henry Built It". The photo in the book is of a Fordor but I can get a good idea of the dimensions and stitch pattern for the Tudor from the pictures. What I don't have is any idea what the rear quarter panel stitch pattern looks like. Does anybody have a 36 Tudor with this stitch pattern that can post some photos for reference? Photos of the front door panel would be helpful as well to verify my assumptions based on the Fordor pictures in the book. Thanks.
|
|
| dean333 | -- 07-30-2022 @ 10:22 PM |
|
I have a 36 Tudor, I’ll check later today. TIM CARLIG
|
|
| Steve Kennedy | -- 07-31-2022 @ 3:57 PM |
|
What is your chassis number? It might help with others who have a chassis number close to yours.
|
|
| Bobbys36 | -- 08-01-2022 @ 8:59 AM |
|
Many thanks to Tim Carlig for supplying photos and going above and beyond by supplying measurements too!
|
|
| dean333 | -- 08-02-2022 @ 1:56 PM |
|
Your welcome Robbie, always willing to help. I also have a restored 37 Fordoor if anyone needs something. TIM CARLIG
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=15837 |