chriscris | -- 09-21-2021 @ 11:56 AM |
There wasnt any hold down hardware that came with my coupe. I have seen available the top hold down with part that accepts a bolt through the firewall. Is there any other hardware I zm missing? I see a hole on either side of the battery, for bolts? Any help or pics appreciated. Thanks Chris
|
|
MG | -- 09-21-2021 @ 2:22 PM |
This guy will have what you need: Michael Driscoll at 3rd Generation Ford Parts 844-327-5988 2600 old Nashville Hwy McMinnville Tn,37110
|
|
Jacques1960 | -- 09-22-2021 @ 5:46 AM |
I may have the dog leg bolts you need; will check
|
|
Robert/Texas | -- 09-22-2021 @ 7:04 AM |
Be careful, some of the modern batteries are a little too tall for the standard length bolts. I got a pair of longer ones for my '37 Ford some years ago but I don't remember where I got them.
|
|
Jacques1960 | -- 09-22-2021 @ 8:56 AM |
Regret I could not locate the spares; I had gotten them from Third Gen as well and they were just right. Highly recommend
|
|
chriscris | -- 09-30-2021 @ 9:54 AM |
Appreciate the replies. 3rd Gen has nothing. CW Moss has the top hold down that bolts inside firewall, but cant locate the bolts. Any chance someone may have s picture? Thanks very much
|
|
nelsb01 | -- 09-30-2021 @ 1:28 PM |
I believe that this what you are looking for. This is for a 1937 Ford, but I think that it was carried over to 1938. There is a black rubber washer
|
|
ford38v8 | -- 09-30-2021 @ 3:15 PM |
Chris, you should know that the original hardware will need to be modified to accommodate the increased height of modern batteries. One, the hold-down bracket has a threaded stud that will misalign with the hole through the firewall, and two, the two hold-down dog leg bolts will need to be extended to be tall enough to engage the hold-down bracket. Alan
|
|
chriscris | -- 10-04-2021 @ 6:15 AM |
Thanks for the pic and info on the new battery height. Fabrication/modification is a part of the fun!
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=15166 |