Topic: 1937 Radio Toggle Switch


TuscanS    -- 12-14-2020 @ 2:46 AM
  Hello
I am in the process of installing a original 1937 ration in my sedan. The literature mentions a glove box toggle switch, does anybody have a image they could share ? Any suggestions for a period correct switch ?

Appreciated


cpipp01@aol.com    -- 12-14-2020 @ 6:22 AM
  I am not sure if this is the correct switch. This was covered in the V8 Times a couple of years ago.


1937sedandelivery    -- 12-14-2020 @ 7:27 AM
  I have a pdf and ppt file showing the switch and other details. I can email it to you? or post it here (if it is not too big).
gregg


1937sedandelivery    -- 12-14-2020 @ 8:27 AM
  here is a low resolution pic. I can make a blow-up of the switch itself? I believe this to be the correct switch.
gregg


TuscanS    -- 12-14-2020 @ 12:45 PM
  Thank you.


1931 Flamingo    -- 12-15-2020 @ 5:58 AM
  What is the purpose of the toggle switch??
Paul in CT


MG    -- 12-15-2020 @ 11:25 AM
  See this thread > https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=4498&keywords=glove%20box%20switch


ken ct.    -- 12-15-2020 @ 12:37 PM
  Ive never heard of a glove box on-off switch in 37. On-off is 1 of the knobs on the radio head ???? Where did you get that info ?? ken ct.


JTHOMPSON    -- 12-15-2020 @ 2:28 PM
  The Ford Auto Radio Installation and Operating Instructions manual that I have. See attached picture of the instructions (page 6)


TonyM    -- 12-17-2020 @ 2:59 PM
  Here is my 1937 Ford radio On/Off toggle switch located in the glove box.

This photo appeared in the V-8 Times a few years ago when this topic came up.

.
.
.
78-730B


EFV-8 Club Forum : https://www.earlyfordv8.org/forum
Topic: https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=14405