1938FordPU | -- 07-09-2020 @ 3:42 PM |
Can anyone tell me if the front end and rear end parts are the same in the 1941 Lincoln Zephyr and a 41 Ford. If not what are the differences. Thanks for your time.
|
|
kubes40 | -- 07-09-2020 @ 4:25 PM |
Differences? Pretty much everything. Mike "Kube" Kubarth
|
|
TomO | -- 07-10-2020 @ 1:45 PM |
A quick glance at the parts catalog found the tie rod and ends and a couple of nuts are the same for the front end. I did not check the rear end parts, but I believe that some of the bearings, seals and nuts are the same. If you are trying to fit a Zephyr front end and rear end on a 41 Ford, I would start the search over and find the Ford parts. If you are trying to use Ford parts in a Zephyr, again I would caution against it, because the Ford parts are not designed to take the stresses in a Lincoln. Tom
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=13992 |