billcarry | -- 05-16-2020 @ 1:31 PM |
I am planning on replacing the front drums, shoes and linings and wheel mounting studs on my 48. All are available from Mac's, Drake and Dennis carpenter. Prices vary a lot. Can anyone advise me on which supplier is the best. There is about a $100 difference in total cost among these vendors.
|
|
51woodie | -- 05-16-2020 @ 2:20 PM |
Bill. Some of those vendors get some of their stock from the same suppliers. My experience is you need to look at pricing, but also shipping fees. I find Mac's to be the most expensive and Drake sometimes backorders. I have had good experience with Carpenter as far as availability and customer service. I bought a front floor mat from DC and is had some white spots on it. I called, emailed a picture, and the sent another at no charge and no shipping. You might take a look at Boling Brothers to see if they have some parts you need. They did good by me. http://www.bolingbrothers.com/
|
|
1937sedandelivery | -- 05-16-2020 @ 4:55 PM |
Bill, I find Joe's Antiques to be very cost competitive and they are really good people and have excellent customer service. gregg
|
|
51504bat | -- 05-16-2020 @ 7:55 PM |
Another vote for Joe's. But you can also try MT car products: http://www.bolingbrothers.com/ I've also had good luck with C&G in Escondido, CA and the Early Ford Store in San Dimas, CA
|
|
trjford8 | -- 05-18-2020 @ 6:44 AM |
Also try Third Gen Automotive at 844-327-5988
|
|
OLDTMR | -- 05-18-2020 @ 3:20 PM |
Another vote here for "Joe's Antique" in Uxbridge, Mass. I must "own" part of that great place by now ! Made a lot of payments over the last few years ! Great folks
|
|
1937sedandelivery | -- 05-18-2020 @ 6:21 PM |
Pretty sure I have the majority ownership of Joe's. Sometimes I buy parts from him just because I can't pass up a good deal and not that I need them... gregg
|
|
OLDTMR | -- 05-19-2020 @ 8:10 AM |
Maybe time to form a "corporate" ownership by customers ? Naw, Joe is too good at what he does !
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=13836 |