| rdevarga | -- 04-19-2020 @ 4:57 PM |
|
I am trying to repair this column drop for a 1936 Pickup. Any idea where I can find a on/off switch lever and a lock cylinder that will work? The cast column drop is stamped "301170". See photos. My goal is to make it work. It does not have to be 100% correct. Thanks, Richard Richard deVarga Austin Texas
|
|
| Don Rogers | -- 04-19-2020 @ 7:33 PM |
|
Here is an exploded view (by Gary Tosel) showing all the components in a 35/36 column drop. I think that you may need a few more parts than you mentioned.
|
|
| 40 Coupe | -- 04-20-2020 @ 5:00 AM |
|
You should try Third Gen Auto I know he sells the 32 and early 35 style bulls eye switch. Don't forget the often lost item 12 from the post above. Third Gen also has these.
|
|
| Mr Rogers | -- 04-20-2020 @ 12:40 PM |
|
Check out some these parts on Ebay under ....... Ignition Lock Cylinder With Keys
|
|
| rdevarga | -- 04-28-2020 @ 3:02 PM |
|
Thank you gentleman. I think I got it. It took me awhile to figure out the mechanics of the ignition switch assembly. Especially that the bent tab on the switch plate inserts into on-off lever grove on the bottom to keep it from sliding with plunger. Lots of moving parts in the housing. Thanks again, Richard Richard deVarga Austin Texas
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=13764 |