| glenn d | -- 12-30-2018 @ 12:32 PM |
|
i need to replace or re-chrome my bumpers. does anyone have any recommendations on replacement bumpers ., who to buy from ? also the quality of stainless steel bumpers ? thanks
|
|
| TomO | -- 12-30-2018 @ 7:08 PM |
|
I would shop local platers and have them replated. Have them use "acid Copper" for the copper layer. This will fill in small imperfections and give a lasting job. Tom
|
|
| trjford8 | -- 12-31-2018 @ 6:28 AM |
|
As suggested by TomO, rechrome your originals. Your originals are spring steel and the reproduction ones are not.
|
|
| VT/JeffH | -- 01-01-2019 @ 2:34 PM |
|
Hi glenn d. Welcome to the V-8 Club Forums! Replace: no Rechrome: yes Breathing: deeply several times Find the best concourse quality shop. Get in line. Label the parts with parts tags, photo before sending. Give them the pics. Buy the wife earrings. -VT/JeffH
|
|
| glenn d | -- 01-01-2019 @ 6:42 PM |
|
re-chrome it is . thanks to all Glenn
|
|
| 37RAGTOPMAN | -- 01-03-2019 @ 6:33 AM |
|
my 2 cents, check this out The front and rear bumpers are different, the rear has more of a curve, then the front, this is to match the curve in the BODY, there are 2 different part numbers in the FORD GREEN BIBLE I went with rechroming the ORIGINALS doing the hard prep work might save you some $ ASK the chrome shop first, what need to be done, Hope this helps, regards 1937RAGTOPMAN
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=12579 |