| red34vic | -- 04-27-2010 @ 6:55 PM |
|
I recently acquired a 34 Ford Vicky and I love it. Only thing is doesn't currently have bumpers.. I am in the process of finding front and rear bumpers and brackets. Another thing is my car has an after market frame. the front frame horn distance measurement is 25 1/2" the rear 43 1/2" can someone direct me to close up pictures and or if anyone knows of a diagram and or an instructions sheet I could look at please let me know... I've only had the car a week and have yet to see any other 34 Vickys at shows..but I'm anxious to get started. any and all remarks welcome
|
|
| trjford8 | -- 04-27-2010 @ 8:05 PM |
|
That's a good looking vicky. Most of the V-8 parts suppliers( Sacramento Vintage Ford, C and G Parts, Dick Spadaro, Bob Drake, etc) carry the bumper irons and bumpers for your car. If you have an aftermarket frame in your car the basic dimensions of the frame should be the same as a stock one if you have a stock steel body. Go to Wescott's web site and you will find frame dimensions on that site. 34 vicky's are fairly rare. I live in Calif. and I see them every so often. I know of 3 that are within an hour of my location.
|
|
| red34vic | -- 04-28-2010 @ 9:32 PM |
|
Thanks for the in-sight.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=1157 |