murphy1941 | -- 10-09-2016 @ 12:15 PM |
When removed lock washers were used but others prefer flat stainless should be used
|
|
TomO | -- 10-10-2016 @ 8:10 AM |
What year manifold and car and is it cast iron or aluminum? Are you making the car Concourse correct or just a driver? Tom This message was edited by TomO on 10-10-16 @ 8:11 AM
|
|
murphy1941 | -- 10-10-2016 @ 11:30 AM |
1941super deluxe tom, it's cast iron intake manifold. , it came with lock washers ,when I purchased it, was it original from factory without any kind of washers? Can't find anything in books. I know on aluminum heads you have to use washers. But on cast steel?.? John
|
|
41-42fordadvisor | -- 10-11-2016 @ 7:21 AM |
From the factory there were no washers used under the intake manifold bolts in 1941. Fred Killian
|
|
murphy1941 | -- 10-12-2016 @ 1:39 PM |
Thank you Fred appreciate very much. John
|
|
41-42fordadvisor | -- 10-13-2016 @ 7:06 AM |
John, Your welcome. Fred
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=10146 |