| tphiel | -- 07-12-2016 @ 8:58 AM |
|
how does the the inner apron support bolt up to the frame cross member? I understand there is a spring arrangement with the bolt-up??? I live in a small town, not much help here...Regards..t
|
|
| trjford8 | -- 08-02-2016 @ 7:52 AM |
|
The inner panels are supported by a V shaped yoke that mounts to the center of the front crossmember.
|
|
| tphiel | -- 08-17-2016 @ 9:21 AM |
|
Thanks , regards,tp
|
|
| unclemark | -- 03-31-2017 @ 7:59 PM |
|
I have one if you are interested. PM me. 41 1.5 platform
|
|
| kubes40 | -- 05-06-2017 @ 4:30 PM |
|
There is a small piece of anti-squeak material between the frame and the brace. Modern duck cloth is very good replacement. The bolt was installed from the bottom- upwards through the frame, anti-squeak pad, brace, spring, flat washer, slotted nut and held in place with a cotter pin.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=9871 |