| johnmyron | -- 01-12-2016 @ 9:40 AM |
|
Rebuilding a hypoid differential used on the F1 trucks as well as station wagons. This on a 48 F1. Requires a tool to spread the case open so that the carrier assembly with shims 0.008 oversize (to preload the Timken bearings) can be installed. IS there one made or available, or do I have to make one?
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=9291 |