| rawlir | -- 02-11-2020 @ 7:41 PM |
|
Hello. A friend has asked me to help ID a running board he THINKS belongs to a 1930's ford truck. Anyone recognize these 2 photos? I could send some measurements as well. Thanks!! Rick Rawlings rickr449@gmail.com This message was edited by rawlir on 4-4-20 @ 6:47 PM
|
|
| Airfritz | -- 02-29-2020 @ 5:45 PM |
|
Looks like possible 36 1/2 ton pickup, but need more pictures and dimensions
|
|
| nelsb01 | -- 02-29-2020 @ 9:10 PM |
|
Maybe 1 1/2 ton truck (one and a half)..........but not pickup See picture for 1/2 ton pickup This message was edited by nelsb01 on 2-29-20 @ 9:48 PM
|
|
| alanwoodieman | -- 03-01-2020 @ 9:50 AM |
|
maybe 48/52 3/4 ton or larger the top of board skirt goes under cab, how about some dimensions? bracket width? full length/width
|
|
| rawlir | -- 03-01-2020 @ 4:18 PM |
|
Guys, THANK YOU for the replies! The front edge left to right measures 32 1/2 inches. From front to back it measures about 14 inches to the upturn. The back from left to right measures close to 34 1/2 inches from farthest point to farthest point. As you come forward from those points it measures close to 38 inches wide left to right at the widest point. Thanks again! Rick This message was edited by rawlir on 4-4-20 @ 6:47 PM
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=13605 |