AussieFlathead | -- 02-27-2017 @ 7:38 AM |
Hi Team, I'm new to the Flathead world. Ive found an Engine & gearbox with the stampings 501483F (see Photo), Can any one enlighten me to year and etc etc - I have been trying to make head n tail of the Vanpelt site information. Appreciated
|
|
alanwoodieman | -- 02-27-2017 @ 4:00 PM |
take some more pictures, show us the heads, trans, intake. those numbers should have had a star followed by 18-, or 99-. this engine could have been for machinery of some sort
|
|
AussieFlathead | -- 02-28-2017 @ 3:33 AM |
Appreciate the feedback, I visited the prospective seller, and unless I turn up next time with the cash I suspect I wont get through the gate. It had 24 bolt heads and the distributor was "not" the crab claw type - it was quite accessible...
|
|
trjford8 | -- 02-28-2017 @ 7:43 AM |
If the distributor is up top and has the round cap and the top water necks are at the front of the heads it's most likely a 1949 to '53 motor.
|
|
TomO | -- 02-28-2017 @ 8:25 PM |
I would guess that it would fall in the range of Aussie serial numbers for the 1950 Ford. Maybe one of our Down-Under friends can shed some light on this. Tom
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=10553 |