| Eagleone | -- 02-23-2025 @ 4:51 PM |
|
Acquired a 40 pickup project & prior owner cut hinge bolt heads off to remove door,wondered if the cab is threaded before I start drilling 12 rusty bolts out &damaging the threads.Appears to be 5/16 holes.Thanks Rick
|
|
| carcrazy | -- 02-24-2025 @ 8:27 PM |
|
The door hinge screws originally used to mount the henges to the body were countersunk head 5/16" x 24 x 1"screws. They are available from Dennis Carpenter, Classic Auto Parts and other vendors listed to the left of this page under "Links".
|
|
| 40 Coupe | -- 02-25-2025 @ 7:34 AM |
|
best to try lots of penetrating oil and maybe some heat grab with vice grips and gently turn.
|
|
| 51504bat | -- 02-25-2025 @ 8:30 AM |
|
This: https://www.eastwood.com/eastwood-screw-buster.html?Wickedsource=Microsoft&Wickedid=79439924039190|default|e&msclkid=026e0652964f1fe39f9f61ef79b3dbf3&utm_source=bing&utm_medium=cpc&utm_campaign=BPA%20-%20Eastwood%20Category%20SE%20PT%20HT%20BU%20Test&utm_term=2331239529389428&utm_content=GSN%20Products ______________ No signature
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=14&Topic=17439 |